Elenco Snap Circuits SnapMicro ® I Standard - Manual (Page 11)

10
On the ‘Serial Port’ page also select the appropriate serial COM port (the port where you connected the
USB programming cable).
If you do not know your COM port number, click ‘Setup’ and find it under Ports or USB devices.
The above windows may appear different depending on the contents of the file folders and the version of
windows being used. The “Options” window should remain as shown but with different COM numbers
depending on the port or plug used. If cables are move to different ports the option window may have to
be changed to match the port being used.
Note that the USB programming cable includes USB-to-serial interface.
Click “OK” to return to editor program.