Elenco Snap Circuits SnapMicro ® I Standard - Manual (Page 47)

46
Open the program editor and make the following flowchart and program
–
Download the program and then turn off the micro-controller and move the serial input cable as shown
on next page. Open the terminal window (F8). Turn the micro-controller on and the first song should
play. The LED will flash in time with the music. Adjust the
loudness control for best level.
Enter the song number 0-3 and click the
Send button. The message “Press Pushbutton to hear
Song” will appear in the Terminal Window. Press the
pushbutton on the snap circuit board and the song you
picked should play.