Elenco Snap Circuits SnapMicro ® I Standard - Manual (Page 17)

16
FLOW CHART PROGRAMMING AND SNAP CIRCUIT
®
BASICS.
PROJECT 1:
In Section 1 you built the basic Snap Circuit
®
board that will be used for most of the projects in this
section. It is important to have a clear road map when writing software. A Flow Chart will keep the
problems at a minimum and allow the programmer to quickly and easily add and remove sections of
programming without fatal errors. Open the programming editor and click on the New Flowchart button
shown here.
The screen shown below will open and the Start box will be added to the grid.