Elenco Snap Circuits SnapMicro ® I Standard - Manual (Page 77)

76
A single clap from the previous page is shown here.
< ±.1
.2 seconds or 200 milliseconds
Amplitude window for less than 10% of a positive or a negative peak.
Expanding the area inside the yellow box will show the first few milliseconds of clap. This area could be
used to trigger an interrupt and start the process to analyze the sound. This area is expanded by;
1. Highlight area using this button.
2. Eliminate rest of curve using this button.
3. Expand using this button.