Elenco Snap Circuits SnapMicro ® I Standard - Manual (Page 30)

29
Open the flowchart window and click on the ‘other’ button to open
this screen.
Use the ‘…’ button to create an empty box. Edit the box in the
BASIC window to contain the command “for b0 = 0 to 3”.
Next add the ‘Play’ and ‘Wait’ commands and then use the ‘…’
button to create the ‘Next’ box. Finish the flowchart as shown here.
Convert flowchart to a basic program using
the PICAXE
®
menu. The basic program
should look similar to the one shown here.