DoorKing 6100 User Manual

Page 20

Advertising
background image

6050-065-L-11-08

18

20

19

18

17

NC

NO

N

2

3

4

5

6

7

8

2.5 Auxiliary Device Wiring

2.4 Auxiliary Terminal Description

20

19

18

17

16

15

14

13

12

11

10

9

8

7

6

5

4

3

2

1

NC

NO

P

1

ON

2

3

4

5

6

7

8

1

ON

2

3

4

5

6

7

8

1. ALARM OUTPUT Provides power to activate the entrapment alarm.
2. ALARM RESET INPUT Input to reset the operator after an entrapment alarm.
3. COMMON Common for alarm output and alarm reset input.
4. TRACKER DATA Supplies gate operator data to Tracker expansion board (P/N 2351-010). Refer to the Tracker Installation
and Wiring Manual for detailed information.
5. TRACKER DATA Supplies gate operator data to Tracker expansion board (P/N 2351-010). Refer to the Tracker Installation
and Wiring Manual for detailed information.
6. TRACKER DATA Supplies gate operator data to Tracker expansion board (P/N 2351-010). Refer to the Tracker Installation
and Wiring Manual for detailed information.
7. PHOTO-BEAM INPUT This input will cause the gate operator to stop when activated in either the opening or closing cycles.
The gate operator will remain stopped until the photo-beam input is cleared, at which time the operator will resume normal
operation.
8. COMMON Common for photo-beam input.

DoorKing Access Control System (Model 1833, 1835, 1837 or
1838) tracker system can be connected.
This system can keep track of gate operator cycle count, shorted
inputs, loop detector problems, any forced entry attempts, if the
gate has struck anything during the open or close cycle, power
interruptions, etc.
For more detailed information
refer to the Tracker
Installation and Wiring
Manual, DoorKing P/N
2351-010.

Terminal 11 required only
if the tracker board will
activate the gate
operator. Refer to the
manual 2351-065 for
detailed information.

1 2 3 4 5 6

8

7

Gate Tracker

(Quad Box Shown)

Red Alarm Output Terminal

Blue Alarm Reset Terminal

White Common Terminal

1

8

7

6

5

4

3

2

Remote Alarm Reset Station

(DoorKing P/N 1404-080 Only)

MUST be mounted in the line-of-sight

of the gate operator.

4502

4502

Auxiliary Terminal

Tracker

LEDs

Advertising
This manual is related to the following products: