EXFO ETS-1000 - Manual (Page 125)

Ethernet Tester Analyzer 117
9 Remote Control
ETS-1000 analyzer allows to connect to a personal computer (PC) via USB
1.1/2.0 interface or via a LAN-port.
To connect the analyzer to a PC via USB-interface, you have to first install
Virtual COM Port driver.
Note: Please note that installation of the driver is necessary for the correct
initialization of ETS-1000 analyzer in your system.
Download the latest version of the VCP driver from the official site of FTDI
Chip company (
http://www.ftdichip.com ) and extract the archive to any
suitable folder.
Please refer to the http://www.ftdichip.com/Drivers/VCP.htm page for the
distribution archives for different operation systems.
Management in the Terminal Mode
An interaction with the analyzer can be performed using HyperTerminal,
the standard Microsoft Windows 95/98/XP/2000/2003 utility.
To update the ETS-1000 microcode, the terminal utility should provide file
transmission via the X-modem protocol.
Terminal Mode Connection Settings
1. Make sure that the unit is turned on.
2. Connect ETS-1000 to a USB-port using the USB-cable from the kit.