EXFO ETS-1000 - Manual (Page 39)

Setting up your Unit
Ethernet Tester Analyzer 31
Unit Setup
Managing Options
Option is an additional functionality of the ETS-1000 analyzer that is not
bundled in the basic shipment.
To activate an option, you need to get an activation key, which is generated
for the particular serial number of a unit. Enter the key in the Options
menu or via remote control using the ats command (see Remote Control
Commands on page 141 for details).
Option Description
ETIP TCP/IP network diagnostics (routing, nodes
availability, DNS).
ETWEB HTTP-connections testing (requires ETIP
option enabled).
ETJT Packet jitter measurements.
ETRC Remote control for the ETS-1000 via TELNET
protocol and WWW-interface.
ETMM Complex traffic generating
ETMPLS MPLS support
ETAT Asymmetric test support