EXFO ETS-1000 User Manual
Page 55
Configuring and Starting a Test
Ethernet Tester Analyzer
47
RFC 2544 General Settings
ToS (Type of Service): the field determines type of service for
datagram. The source can set any value from the table below in
accordance with RFC 1349
methodology.
UDP src: Enter the source UDP port.
UDP dst: Enter the destination UDP port.
Value
Description
Notes
1000
Minimize delay
Use the value if a
period of packet
delivery from the
source to destination
(latency period) is the
main priority and must
be minimum.
0100
Maximize throughput
Use the value to
specify that the packet
must be routed
through the link with
the maximum
throughput.
010
Maximize reliability
Use the value to
ensure the packet is
delivered without
retransmission
001
Minimize monetary
cost
Use the value to
minimize the
monetary cost of the
data delivery
000
All normal
In this case packet
routing is left at the
discretion of a
provider.