EXFO ETS-1000G - Manual (Page 115)

10 Gigabit Ethernet Analyzer 105
19 Interface Parameters
Interface Select the interface (Test or LAN) to be configured.
Mode Select the interface mode: 10G (10 Gbps rate for 10G port
with SFP+ module); 10G(WAN) (WAN-mode | 10G Ether-
net, adapted to work in OC-192 networks); Auto(1G)
(autonegotiation mode for 1G port); 1 000/100/10 (set
fixed rate 1000 Mbps, 100 Mbps or 10 Mbps port 1G). If
you select Auto(1G), the Autonegotiation menu item is
enabled.
MAC
address The MAC address of the port (Test or LAN) being config-
ured.
Press (Default) to use the port's MAC address speci-
fied in the Information menu as the current MAC address.
Autonegoti-
ation Switch to the Autonegotiation setup screen.
VLAN Open the VLAN menu.
MPLS Open the MPLS menu.