EXFO ETS-1000G - Manual (Page 180)

Remote Control Commands
170 ETS-1000G
Remote control commands (TELNET). Configuration mode
lan vlan count off / 1 / 2 / 3 Set the number of VLAN tags.
lan vlan [1-3] id int Set the value of the 12-bit VLAN identifier.
lan vlan [1-3] priority int Set the traffic priority value.
Profiles
profile rename [n] [name] Set the profile name.
profile save [n] Save the current settings to cell n.
profile lock [n] Enable write protection for cell n.
profile unlock [n] Disable write protection for cell n.
profile load [n] Load the settings profile from cell n.
profile delete [n] Remove the settings profile from cell n.
profile list Display a list of saved profiles in the following
format: “index, name, data, status”, where
index is the number of the cell where the
profile is stored, name is the profile name, data
is the date of saving, and status is the cell's
status (write-protected or not).
profile show [n] Display the content of profile n.
General commands
exit Exit the configuration mode.
help List available commands.
time HH:MM:SS Set the time.
date DD-MM-YYYY Set the date.
Command Action