EXFO ETS-1000G User Manual
Page 43
Preparing RFC 2544 for Analysis
10 Gigabit Ethernet Analyzer
33
Setting Test Parameters
Parameters of the Latency Test
Trial, s
The period of time during which the test should be per-
formed for each frame size specified in the settings
(1-3600 s).
Resolution, %
Resolution at which the throughput search should be per-
formed. Possible values: 10, 1, 0.1, 0.01, 0.001, 0.0001.
The minimum resolution value corresponds to the highest
accuracy of channel throughput measurement and the lon-
gest test duration.
Threshold, %
Threshold of available loss (0-10%). If the quantity of
received packets is less than the quantity of transmitted
packets by the value of allowed loss threshold, the test will
be considered as completed.
Enabled
Enabling/disabling the data deference analysis.
Trial qty
The number of test reiterations for each defined frame size.