EXFO FTB -5240S/5240BP Optical Spectrum Analyzer - Manual (Page 347)

OSA 341
B SCPI Command Reference
This appendix presents detailed information on the commands and
queries supplied with your FTB-5240S/S-P/BP Optical Spectrum Analyzer.
Quick Reference Command Tree
I
MPORTANT
Since the FTB-500 can house many instruments, you must explicitly
specify which instrument you want to remotely control.
You must add the following mnemonic at the beginning of any
command or query that you send to an instrument:
LINStrument<LogicalInstrumentPos>:
where <LogicalInstrumentPos> corresponds to the identification
number of the instrument.
For information on modifying unit identification, refer to your
platform user guide.
Command Parameter(s) P.
ABORt 349
CALCulate[1.
.n]
[WDM] BANDwidth
[1|2]|BWID
th[1|2]
RelativeLEVe
l
<PowerLevel[<wsp>DB|W/W|
PCT]>|MAXimum|MINimum|DE
Fault
350
RelativeLEVe
l?
[MAXimum|MINimum|DEFault] 352
CHANnel AUTO <Auto> 354
AUTO? 355
AUTO CENTer ITUGrid <Auto> 356
FTB-500 backplane identification number
Instrument slot number:
4-slot backplane: 0 to 3;
8-slot backplane: 0 to 7
1Y