EXFO FTB -5240S/5240BP Optical Spectrum Analyzer - Manual (Page 449)

SCPI Command Reference
OSA 443
Product-Specific Commands—Description
Example(s) CALC:WDM:CHAN:DEF "C_001", 1290.000 NM
CALC:WDM:CHAN:SEL "C_001"
CALC:WDM:CHAN:NOIS:AUTO OFF
CALC:WDM:CHAN:NOIS:TYPE INBN
CALC:WDM:CHAN:NOIS:TYPE? Returns
INBANDNARROWFILTER
Notes INBand and INBandNarrowfilter noise types are
available only if software option "InB" is active.
INBand and INBandNarrowfilter noise types are
computed only if analysed trace was acquired
using PMMH averaging type.
If auto noise measurement is active, specific
noise type setting has no effect.
See Also :CALCulate[1..n][:WDM]:CHANnel:AUTO:NOISe:
TYPE
:CALCulate[1..n][:WDM]:CHANnel:NOISe:AUTO
:CALCulate[1..n][:WDM]:CHANnel:NOISe:TYPE?
:CALCulate[1..n][:WDM]:CHANnel:NOISe:DISTan
ce:FREQuency
:CALCulate[1..n][:WDM]:CHANnel:NOISe:DISTan
ce[:WAVelength]
:CALCulate[1..n][:WDM]:CHANnel:NOISe:WIDT
h:FREQuency
:CALCulate[1..n][:WDM]:CHANnel:NOISe:WIDT
h[:WAVelength]
:CALCulate[1..n][:WDM]:CHANnel:SELect
:SENSe[1..n]:AVERage:TYPE
:CALCulate[1..n][:WDM]:CHANnel:
NOISe:TYPE