EXFO FTB -5240S/5240BP Optical Spectrum Analyzer - Manual (Page 550)

SCPI Command Reference
544 FTB-5240S/S-P/BP
Product-Specific Commands—Description
:SENSe[1..n]:AVERage:TYPE
Description This command selects the acquired trace
averaging type.
At *RST, averaging is set to SCALar.
Syntax :SENSe[1..n]:AVERage:TYPE<wsp>SCALar|Pola
rizationMinMaxHold
Parameter(s) Type:
The program data syntax for the first parameter is
defined as a <CHARACTER PROGRAM DATA>
element. The allowed <CHARACTER PROGRAM
DATA> elements for this parameter are:
SCALar|PolarizationMinMaxHold.
The parameter corresponds to the newly
selected trace averaging type.
SCALar: selects scalar averaging type.
PolarizationMinMaxHold: selects averaging type
for InBand noise measurement.
Example(s) SENS:AVER:TYPE SCAL
SENS:AVER:TYPE? Returns SCALAR