EXFO FTB -5240S/5240BP Optical Spectrum Analyzer - Manual (Page 386)

SCPI Command Reference
380 FTB-5240S/S-P/BP
Product-Specific Commands—Description
Notes INBand and INBandNarrowfilter noise types are
available only if software option "InB" is active.
INBand and INBandNarrowfilter noise types are
computed only if analysed trace was acquired
using PMMH averaging type.
If auto noise measurement is active, specific
noise type setting has no effect.
See Also :CALCulate[1..n][:WDM]:CHANnel:AUTO
:CALCulate[1..n][:WDM]:CHANnel:AUTO:NOISe:
AUTO
:CALCulate[1..n][:WDM]:CHANnel:AUTO:NOISe:
DISTance:FREQuency
:CALCulate[1..n][:WDM]:CHANnel:AUTO:NOISe:
DISTance[:WAVelength]
:CALCulate[1..n][:WDM]:CHANnel:AUTO:NOISe:
WIDTh:FREQuency
:CALCulate[1..n][:WDM]:CHANnel:AUTO:NOISe:
WIDTh[:WAVelength]
:CALCulate[1..n][:WDM]:CHANnel:AUTO:NOISe:
TYPE?
:CALCulate[1..n][:WDM]:CHANnel:NOISe:TYPE
:SENSe[1..n]:AVERage:TYPE
:CALCulate[1..n][:WDM]:CHANnel:AUTO:
NOISe:TYPE