EXFO FTB-635 Wideband Copper and DSL Test Module - Manual (Page 164)

Multimeter Tests
156 FTB-635
Capacitance/Opens Test
The page allows you to set the following parameters:

Selected Pair allows you to select the pair for which the cable
parameter is to be set.

Cable Type allows you to select a cable entry (with its associated
parameters) from the current Cable Book, to use for testing. The
selection is not saved when leaving the test. The current Cable Book
entry is shown by default.

Capacitance T-R displays the capacitance value from Tip to Ring in
nF/mi ranging from 10.0 to 500.0.

Capacitance T/R to GND displays the capacitance value from Tip or
Ring to Ground, in nF/mi ranging from 10.0 to 500.0.
Summary
Summary tab displays the pass/fail status of the tests executed. Refer
Copper Tests: Result Summary on page 291 for more information.