EXFO FTB-635 Wideband Copper and DSL Test Module - Manual (Page 321)

xDSL Tests: Using the Main Menu
Copper and xDSL Tests 313
Test Configuration
WAN Setup
The WAN tab allows you to configure the connection between the WAN
port of the unit and the ISP (internet service provider).

Access mode options are dependent on the Line mode selection:

If ADSL2+, ADSLMulti, and VDSL2/ADSL2+- available options are
Sync Only, Bridged (not in Auto Test), DHCP, Static, PPPoE,
PPPoA, IPoA.

If ADSL2+ Bonding and VDSL2 Bonding - available options are
Sync Only, Bridged (not in Auto Test), DHCP, Static, PPPoE.

For Ethernet - available options are Bridged, DHCP, Static, PPPoE.

VLAN enables the unit to analyze and pass WAN tagged ethernet
frames through the virtual local area network (VLAN). Available
options are:

Disable

Enable ATM/PTM

Enable PTM