EXFO PM-1100 Optical Power Meter - Manual (Page 44)

Operating the Optical Power Meter
34 PM-1100
Customizing Your Optical Power Meter
To erase one wavelength from the shortlist:
1. Press Setup.
2. Scroll (left/right arrows) to LAMBDA.
3. Scroll (up/down arrows) until the wavelength you want to delete
appears in the lower portion of the display.
4. Press ENTER. The wavelength will start flashing.
5. Set all the wavelength digits to zero (use the up/down arrows to
change the flashing digit and left/right arrows to activate the next digit).
Note: The wavelength that is currently active in absolute mode cannot be erased.
6. Press ENTER.
7. To exit the Setup menu, press Setup.
To erase all wavelengths from the shortlist:
1. Press Setup.
2. Scroll (left/right arrows) to LAMBDA.
3. Scroll (up/down arrows) until DEL ALL appears in the lower portion of
the display.
4. Press ENTER.
5. To exit the Setup menu, press Setup.
Note: The wavelength that is currently active in absolute mode cannot be erased.