EXFO PM-1100 Optical Power Meter - Manual (Page 49)

Operating the Optical Power Meter
Optical Power Meter 39
Customizing Your Optical Power Meter
Saving a Configuration
Once the PM-1100 is customized for a specific application or user, it is
possible to save the configuration. Saved parameters are:
³
resolution
³
sampling rate
³
current wavelength and corresponding reference
³
offset
Up to ten configurations can be saved and recalled as needed.
To save a configuration:
1. Customize the PM-1100 as required.
2. Press Setup.
3. Scroll (left/right arrows) to SAVE.
4. Press ENTER. The current configuration number will start flashing.
5. Use the up/down arrows to modify the configuration number.
6. Press ENTER.
7. To exit the Setup menu, press Setup.
Configuration number