EXFO PM-1100 Optical Power Meter - Manual (Page 94)

Remote Control Commands
84 PM-1100
Product-Specific Commands—Description
MMEMory:ACQuisition:DATA:RECAll:VALUE?
Description This command returns the measurement saved in the <data>
memory location.
Syntax MMEM:ACQ:DATA:RECA:VALUE?<space><data>
Parameters The <data> parameter represents the memory location from
which to recall the measurement data (out of the 1024
available).
Response Measurement data saved in the specified memory location in
the “±999.999E±99” format.
Note Use the MMEM:ACQ:DATA:RECA:UNIT? query to get the
corresponding measurement units.
Use the MMEM:ACQ:DATA:RECA:WAV? query to get the
wavelength at which the measurement was taken.
Example MMEM:ACQ:DATA:RECA:VALUE? 1021
MMEMory:ACQuisition:DATA:RECAll:WAV elength ?
Description This query returns the wavelength corresponding to the last
value fetched with the MMEM:ACQ:DATA:RECA:VALUE? query.
Syntax MMEM:ACQ:DATA:RECA:WAV?
Response A wavelength in the “9999 nm” format.
Example MMEM:ACQ:DATA:RECA:WAV?