EXFO IQS-2600B Tunable Laser Source for IQS Platforms - Manual (Page 130)

SCPI Command Reference
124 IQS-2600B
Product-Specific Commands—Description
:TRIGger[1..n][:SEQuence]:INPut
Description This command allows you to set the operating
mode of the input trigger. The sweep can be
started with a trigger pulse at each end of a scan
in Continuous mode. In Step-by-Step mode,
each step can be started with a trigger pulse.
At *RST, the trigger is disabled.
Syntax :TRIGger[1..n][:SEQuence]:INPut<wsp>DISable
d|SSWeep
Parameter(s) TriggerMode:
The program data syntax for the first parameter is
defined as a <CHARACTER PROGRAM DATA>
element. The allowed <CHARACTER PROGRAM
DATA> elements for this parameter are:
DISabled|SSWeep.
This parameter corrresponds to the the desired
state for the input trigger.
DISabled, trigger operation is disabled.
SSWeep, trigger operation is enabled.
Example(s) TRIG:SEQ:INP SSW
Notes This function cannot be performed while the
module is sweeping.
See Also TRIGger[1..n][:SEQuence]:INPut?
SOURce[1..n]:WAVelength:SWEep:MODE
SOURce[1..n]:WAVelength:SWEep:STATe