FeiYu Tech FY-Panda2 Autopilot - Manual (Page 23)

Guilin Feiyu Electronic Technology Co., Ltd.
Guilin Feiyu Electronic Technology Co., Ltd http://www.feiyu-tech.com [email protected]
Page 20
Figure Map Information Interface
 After finish the Step E, if the current parameters of the autopilot can be display
on the GCS, it will indicate that the connection is successful.
 The ID number can be reset by users. The new number please select
from
“00000” to “65535”.If the number of characters more than 5 ,the ID
number will invalid.
 The ID number reset operation support under the
“OPTION1 (RC control
mode ) ” and “OPTION2 (DRRC control mode)”.
 Connection diagram.