Step three: servo control reverse setting – FeiYu Tech FY-Panda2 Autopilot User Manual
Page 28
Advertising

Guilin Feiyu Electronic Technology Co., Ltd.
Guilin Feiyu Electronic Technology Co., Ltd http://www.feiyu-tech.com [email protected]
Page 25
Step Three: Servo control reverse setting
( 1 ) Aileron, Elevator, Throttle, Rudder auto control surface
direction setting
Operate the RC control sticks to control the aircraft servos movement to observe if
they are in the same control direction with the RC sticks. And if not, please adjust the RC
to make them correct.
Switch to the "Auto Balance Mode" mode after set up the RC unit, check the auto
control direction.
Advertising