FeiYu Tech FY-Panda2 Autopilot - Manual (Page 34)

Guilin Feiyu Electronic Technology Co., Ltd.
Guilin Feiyu Electronic Technology Co., Ltd http://www.feiyu-tech.com [email protected]
Page 31
 After set up the parameters please click on “ Finish and Save ” button to save
the setting.
14. PandaⅡAutopilot System Other Setting
14.1 Power Voltage Calibration
Please make a calibration for the measure of the power voltage before flight. Steps
for calibration please refer to the Appendix D. If devices (PandaⅡ autopilot or power
manager) have any replacement, please calibrate again.
14.2 Photograph Control
The camera should be connect to the P1 on the PandaⅡmodule. The camera shutter