GoDEX EZ2050 series - Manual (Page 27)

23
4.3 Label dispenser
4
Accessories
3. Wind the label liner
around the rewinder
and secure it using the
retention clip.
4. Return the print head
release lever to its
original position.
【 Note 】
Please make sure that the
label stock rewinds the right
way onto the rewind hub.
2 3
1
5. Replace the lower
cover plate on the
printer and secure it
with screws
6. Press the lower part of
the stripper sensor to
fold it out.
7. The sensor locks in a
horizontal position.
8. Close the printer cover
to complete installation
of the dispenser.