GoDEX EZ2050 series - Manual (Page 33)

29
4
Accessories
4.6 Installing the Applicator interface
1 Applicator interface
1
2
2 Screws (set of 2)
1. Place the printer on a
flat surface and open
the printer cover.
【 Note 】
Remember to switch off the
printer before starting the
installation.
2. Unscrew the two screws
marked in the illustration
on the right and remove
the left-hand side of the
printer housing.
3. Unscrew the screws on
the applicator interface
cover and remove the
cover.