GoDEX EZ2050 series - Manual (Page 31)

27
4.5 Installing the Parallel adapter
4
Accessories
1 Parallel cable
1 2
3 4
2 Parallel adapter
3 Connection cable
4 Screws (set of 2)
1. Check whether the
printer is switched off.
Place the printer on a
flat surface and open
the printer cover.
2. Unscrew the two screws
marked in the illustration
on the right and remove
the left-hand side of the
printer housing.
3. Unscrew the screws on
the parallel port cover
and remove the cover.