Labconco Fume Adsorbers 3955422 - Manual (Page 11)

Product Service 1-800-522-7658 7
C
HAPTER
3
G
ETTING
S
TARTED
Now that the site for your Fume Adsorber is properly prepared, you are ready to
unpack, inspect and install the enclosure. Read this chapter to learn how to:

Unpack and move the enclosure.

Set up the enclosure with the proper supporting structure.

Installation of carbon filter(s). (Fume Adsorbers ship with organic vapor
filter(s).

Connect the electrical supply.

Validate the enclosure face velocity.
Unpacking the Enclosure
Carefully remove the shrink-wrap and carton on the unit and inspect it for damage
that may have occurred in transit. If damaged, notify the delivery carrier
immediately and retain the entire shipment intact for inspection by the carrier.
DO NOT RETURN GOODS WITHOUT THE PRIOR
AUTHORIZATION OF LABCONCO. UNAUTHORIZED
RETURNS WILL NOT BE ACCEPTED.
IF ENCLOSURE WAS DAMAGED IN TRANSIT, YOU MUST
FILE A CLAIM DIRECTLY WITH THE FREIGHT CARRIER.
LABCONCO CORPORATION AND ITS DEALERS ARE NOT
RESPONSIBLE FOR SHIPPING DAMAGE.
Do not discard the packing material until you have checked all of the components
and tested the enclosure. We recommend that you do not remove the enclosure
from its shipping container until it is ready to be placed in its final location.
The United
States
Interstate
Commerce
Commission
rules require
that claims be
filed with the
delivery carrier
within fifteen
(15) days of
delivery.

