Labconco Fume Adsorbers 3955422 - Manual (Page 28)

Chapter 7: Troubleshooting
Product Service 1-800-522-7658 24
PROBLEM CAUSE CORRECTIVE ACTION
Blower won’t
operate.
Unit not plugged
into outlet. Plug the enclosure into appropriate
electrical service.
Circuit breaker(s)
or Ground Fault
Interrupter. Reset circuit breaker.
Blower wiring is
disconnected. Inspect blower wiring and re-connect.
Blower switch is
defective. Replace switch.
Motorized impeller
or blower is
defective. Replace motorized impeller or blower.