Labconco Protecto Downdraft Powder Station 3410025 User Manual
Page 8
Product Service 1-800-522-7658
4
C
C
h
h
a
a
p
p
t
t
e
e
r
r
3
3
:
:
G
G
e
e
t
t
t
t
i
i
n
n
g
g
S
S
t
t
a
a
r
r
t
t
e
e
d
d
Now that the installation site is properly planned, you are ready to inspect
and install the Protector Downdraft Powder Station. This chapter covers how
to:
Unpack the station.
Install the station.
Connect the electrical supply source.
Tools required for installation the station include a flat-blade screwdriver,
scissors, or a box knife.
Note: The station can weigh up to 75 lbs. (34 kg). Always follow safe-lifting
guidelines when unpacking or moving the station.
Unpacking the Station
Carefully remove the outer carton and inspect the station for damage that
may have occurred in transit. If the station is damaged, notify the delivery
carrier immediately and retain the entire shipment intact for inspection by the
carrier.
Note: United States Interstate Commerce Commission rules require that
claims be filed with the delivery carrier within fifteen (15) days of delivery.
Do not return goods without the prior authorization of Labconco.
Unauthorized returns will not be accepted.
If the station was damaged in transit, you must file a claim directly with the
freight carrier. Labconco Corporation and its dealers are not responsible for
shipping damages.
Do not discard the carton or packing material for the station until all of the
components have been checked, installed and tested.