Labconco Protecto Series Evidence Drying Cabinets 3390001 User Manual
Page 8
Product Service 1-800-522-7658
4
C
C
h
h
a
a
p
p
t
t
e
e
r
r
3
3
:
:
G
G
e
e
t
t
t
t
i
i
n
n
g
g
S
S
t
t
a
a
r
r
t
t
e
e
d
d
Now that the installation site is properly planned, you are ready to inspect
and install the Protector evidence drying cabinet. This chapter covers how to:
• Unpack and move the cabinet.
• Install the cabinet.
• Connect the electrical supply source.
Tools required for installation the cabinet include two 1/2" wrenches, a flat-
blade screwdriver, a #2 Phillips screwdriver, , scissors, or a box knife.
Note: The cabinet weighs approximately 250 lbs. (114 kg). The shipping
pallet allows for lifting with a mechanical lift truck or floor jack. If you must
lift the product manually, use at least three (3) persons and follow safe-lifting
guidelines.
Unpacking the Cabinet
Carefully remove the outer carton and inspect the cabinet for damage that
may have occurred in transit. If the cabinet is damaged, notify the delivery
carrier immediately and retain the entire shipment intact for inspection by the
carrier.
Note: United States Interstate Commerce Commission rules require that
claims be filed with the delivery carrier within fifteen (15) days of delivery.
Do not return goods without the prior authorization of Labconco.
Unauthorized returns will not be accepted.
If the cabinet was damaged in transit, you must file a claim directly with the
freight carrier. Labconco Corporation and its dealers are not responsible for
shipping damages.