Labconco Protector XLE Fume Hoods 9970801 - Manual (Page 30)

Chapter 7: Modifying Your Protector XLE
Product Service 1-800-522-7658 26
Installing Ceiling Enclosures Above the
Fume Hood
Your Protector XLE Fume Hood has mounting holes to accept a ceiling enclosure
to close off the area between the top of the hood and the ceiling. Contact
Labconco Customer Service for ordering information.
Installing Additional Service Fixtures
Additional service fixtures can be installed in the available service fixture holes in
both sidewalls and corner posts. The fume hood is factory set to accept up to four
valves per side. Contact Labconco Customer Service for information.
Figure 7-5 – Hose Connector Figure 7-3 - Knob Figure 7-4 - Valve
Figure 7-2