Your next step – Labconco Protector XLE Fume Hoods 9970801 User Manual
Page 8
Chapter 1: Introduction
Product Service 1-800-522-7658
4
Your Next Step
If your Fume Hood needs to be installed, proceed to Chapter 2: Prerequisites to
ensure your installation site meets all of the requirements. Then, go to Chapter 3:
Getting Started for instructions on how to install your laboratory fume hood and
make all of the necessary connections.
If you would like to review how laboratory fume hoods operate, go to Chapter 4:
Performance Features and Safety Precautions.
For information on the operational characteristics of your laboratory fume hood,
go to Chapter 5: Using Your Protector XLE.
If your laboratory fume hood is installed and you need to perform routine
maintenance on the cabinet, proceed to Chapter 6: Maintaining Your Protector
XLE.
For information on making modifications to the configuration of your fume hood,
go to Chapter 7: Modifying Your Protector XLE.
Refer to Chapter 8: Troubleshooting if you are experiencing problems with your
fume hood.