Connecting the blood pressure cuff, Calibrating the blood pressure cuff using lleap, Connecting the spo – Laerdal SimMan Essential Bleeding User Manual
Page 22: Probe, Setup
22
SETUP
Connecting the Blood Pressure Cuff
The Patient Simulator is delivered with a specially adjusted blood
pressure cuff. Connect the tube to the white BP connector at the
side of the Patient Simulator before use.
Calibrating the Blood Pressure Cuff
Using LLEAP
1 Select <Tools> <Maintenance> and choose <Calibrate BP...>
2 Follow the onscreen wizard instructions to perform the
calibration.
Connecting the SpO
2
Probe
The SimMan Essential Bleeding
SpO
2
probe is made up of a
light diode and light sensor.
When the beam between the
diode and sensor is broken, the
Patient Monitor Application
registers that the SpO
2
probe is
connected.
1 Connect the probe’s USB
plug to the Patient Monitor
PC.
2 The probe can be placed on any suitable area on the Patient
Simulator. Ensure that the probe is always firmly fixed in position.