Working with session viewer “stand-a-lone, Making a video recording, 6 working with session viewer “stand-a-lone – Laerdal SimView User Manual
Page 11
11
6 Working with Session Viewer “stand-a-lone”
6.1 Making a video recording
You can start a Video recording from the home window by pressing the red record button, input from USB
camera, PM and audio will be recorded if they are activated.
Note! Only on licensed versions.
Note! The recording button is only active if a camera is activated and you have a license.
Note! Do not run any other application on the PC when in “View & Setup”, it may make your PC
unresponsive.
Figure 21 Start recording
Figure 22 Stop recording
During recording you will see this in the top of the window:
Figure 23 During recording
Figure 24 Press “Yes” to stop the recording, opening the debrief window
Note! You cannot add comments during the recording, see next chapter how to add comments and events
to the recording later
.