Laerdal SimView - Manual (Page 6)

6
5 Working with a licensed Session Viewer
Figure 5 The start-up screen.
If you want to do setup or recording, and access all features press “Setup system or start video
recording”.
The next chapters will go through the possibilities in the main window
5.1 Configuration
To change the configuration by adding equipment to the Session Viewer press the “Setup system or start
video recording” link on the start-up window as shown on Figure 5.
You can add one USB camera, one Patient Monitor (PM) and one audio source to the Session Viewer.
After clicking in the “Setup system or start video recording” you will get to the Session Viewer main
window. This is where you can add equipment, open .ssx file, create new recordings or use the live view.
Figure 6 The Session Viewer main window.