Laerdal SimView - Manual (Page 15)

15
7 SessionViewer used with LLEAP
7.1 All in one setup
Figur 1 One room setup, PC running LLEAP and SessionViewer.
The one room setup, here the room will be used for both training and debriefing, the PC runs all the
necessary programs via LLEAP.
7.2 Multiple PC setup
Figur 2 Two room setup
In the two room setup one PC is running LLEAP and the simulator, while remote controlling the other PC.
The PC in the training room runs Session Viewer and Patient Monitor, recording is controlled from the
simulator in the control room.
The training room is also used for debriefing as the is done by the Session Viewer