Adding a patient monitor, 4 adding a patient monitor – Laerdal SimView User Manual
Page 9
Advertising
9
5.4 Adding a Patient Monitor
To add a USB Web camera to Session Viewer, start Session Viewer and choose:
“Setup system or start video recording” on the start window.
1. From the Home screen click the “Add equipment” (1)
2. Click the in the “Select equipment to add” (2).
3. Select the Patient Monitor by clicking in the list window (3).
4. The search for a PM will start immediately
5. If more than one PM is found, select the right one in drop down box by clicking the control handle
(5).
6. Press “Add equipment” (6).
Figure 13
Figure 14
Figure 15
Figure 16
Advertising