N-series isolation poppet valves, 0 installation and use, N-series options – Nor-Cal N-Series Op Lit User Manual

Page 7: 3 valve & options nomenclature, 1 unpacking and detrashing

Advertising
background image

7

Call toll free

800-824-4166

or 530-842-4457

FAX 530-842-9130

N-Series Isolation Poppet Valves

Air Solenoid

(Optional)

Activation Air Inlet

Piston Seal

Bellows

Valve Body

Poppet O-Ring

Bottom Port

Activation Air Inlet

Standard with 360

o

Swivel

Actuator Cap

Position Sensor Board

(Optional)

Bonnet Seal O-ring

Position Sensor Ring

Closing Springs

Air Cylinder

Side Port

Poppet

Piston

FIGURE 4.2.1

4.3 Valve & Options Nomenclature

Position

Indicator 1

O-ring

Type

Air

Solenoid

Position

Indicator 2

Soft

Start

Valve

Model Number

Example:

NAP-150-NW-O-O-K79-S11-SS

Right angle N-Series valve with 1.5 inch bore, NW-40 flanges, redundant optical

position indicators, Kalrez 4079 O-rings, 120VAC air solenoid and soft start option.

FIGURE 4.3.1

5.0 Installation and Use

5.1 Unpacking and Detrashing

Unless otherwise requested, the N-Series valve is bagged and labeled according to standard clean room protocol. Outer packaging varies depending on the
number and types of valves ordered.
Before unpacking, please inspect the box thoroughly to make sure it is undamaged. Report any obvious signs of damage or tampering to the freight carrier.
Leave plastic bag intact until the product is ready to be transferred to a clean area.

NOTE:

HARD COPY DOCUMENTATION: Printed operating manuals are no longer supplied in the packaging with Nor-Cal valve products. All

product documentation is available on-line at

http://www.n-c.com/productdocumentation.aspx

.

N-Series Options

Please use the following part numbering
tree to add the appropriate options to a
standard N-Series valve model number.

Advertising