ParkZone PKZ1980 - Manual (Page 7)

7
EN
1. Put the wing tube in the round hole in the wing slot of the
fuselage.
2. Put right wing on the wing tube.
3. Move the wing on the tube into the slot in the fuselage while
putting the aileron control connector in the fuselage.
4. Fully install right wing in fuselage using screw.
5. Install the left wing using the steps above.
6. Attach the two (2) aileron connectors to the aileron Y-harness
in the fuselage.
Note: There is no difference between the two connections on
the Y-harness. Left and right servo lead connectors do not have
to be connected to a particular side of the Y-harness.
Installing Wings