Pitney Bowes DM875 Series - Manual (Page 171)

DM825™ and DM875™ Series Digital Mailing System Operating Guide
SV62200 Rev. C 9 - 11
Changing the
Printhead If you have cleaned the printer nozzle and changed the print cartridge and
the meter stamp is still not satisfactory, replace the printhead.
Instructions for replacing the printhead are included with each replacement
and are repeated here for your convenience.
1. Press the Menu key.
2. Select Maintenance.
3. Select Replace Printhead. The “Printhead Warning - Continue?”
screen appears. Read this screen carefully since once you agree to
continue, you cannot cancel the process.
4. Once you verify that you have a replacement printhead, select Yes,
continue from the screen. The “Replace Printhead” screen appears.
5. Open the main cover and
locate the printhead tab.
6. Push the printhead tab to
the left as shown here.
CAUTION: Do NOT attempt to clean the printhead.
Printhead tab