Rocktron VooDu Valve - Manual (Page 100)

98
Using the Voodu Valve with a Rocktron All Access ™ in REMOTE mode
A Rocktron All Access ™ MIDI footswitch can act as a dedicated remote control for the Voodu Valve—allowing
direct access to specific Voodu Valve features and parameters from the footswitch at any time.
To use an All Access ™ footswitch as a dedicated remote, connect the MIDI OUT of the All
Access to the REMOTE jack of the Voodu Valve using a 7-pin MIDI cable, as shown below.
Step 1
Step 2 Reinitialize the controller assignments as shown earlier in this section under the heading
"Restoring the Voodu Valve Controller Assignments". This will match up the Voodu Valve's
controller assignments to the All Access. A code of "221" must be entered to initialize only the
controller information.
ALL RESTORE 221
To set up the Voodu Valve for remote operation, do the following: