Rocktron VooDu Valve - Manual (Page 102)

100
Upon proper setup and connection of the units, the All Access will provide the functions shown above.
When operating in Remote mode with a Voodu Valve, switches 1-10 act as normal preset switches, while switches 11-
15 each perform a special function.
Switch 11 switches in or out the first effect of the current configuration (not including HUSH®). This can
be either chorus, flange, tremolo, pitch shift, wah or phase shift.
Switch 12 switches in or out the delay effect.
Switch 13 switches in or out the reverb effect.
Switch 14 can be pressed and held to mute the output of the Voodu Valve for as long as the switch is held
down. This is especially useful when switching guitars during a live set.
Switch 15 provides instant access to the Tap Delay feature of the Voodu Valve. Switch 15 can be used
instead of connecting a momentary footswitch to the FOOTSWITCH jack on the rear of the Voodu Valve.
For more information on the Tap Delay feature, turn to page 81.