Rocktron VooDu Valve - Manual (Page 8)

5
8 PARAMETER ADJUST control
This control is used to adjust a displayed parameter value. When the parameter
is changed from its original value, the LED above the STORE button will light
until either the new value is stored, a new preset is selected or the parameter is
returned to its original value.
9 STORE button/led
This button is used to store values into the Voodu Valve™ memory when altered.
See "Storing Changed Preset Parameters" in Chapter 8 for more information on this
procedure.
10 PARAMETER SELECT control
When adjusting parameter values, this control will scroll through the available
parameters under the current function heading.
In the "Title Edit" function, this control will scroll through the character locations
to be edited.
11 FUNCTION SELECT control
This control allows access to each function of the Voodu Valve™. Depending on
what configuration is currently recalled, these functions include:
Global Pre EQ (Expert) Phaser Delay Footswitch
Mixer Post EQ (Expert) Flanger Reverb Program Changes
High Gain Compressor Tremolo Config Select MIDI Channels
Low Gain Speaker Simulator Pitch Shift Title Edit MIDI Dump/Load
HUSH Wah-Wah Chorus Controller Assig Factory Restore
12 SPEAKER SIMULATOR indicator
When lit, this LED indicates that the Speaker Simulator is activated for the current
preset.
13 OUTPUT LEVEL control
This control is used to adjust the output level of the unit at the unbalanced
outputs.
14 INPUT LEVEL meter
These LEDs provide visual indication of the peak level of the input signal when
in the Preset Select mode. For the optimal signal-to-noise ratio, it is best to adjust
the input level so that the last LED (0dB) is rarely lit. This will guard against the
possibility of overdriving the unit.
These LEDs also display the final digital mixer output levels when any other
functions are selected. This will help you to guard against clipping the output of
the mixer at the digital-to-analog converter.
15 INPUT LEVEL control
This control adjusts the unit’s gain to match the signal level at the input of the
Voodu Valve™. Use the INPUT LEVEL meter to determine the setting of this
control.
16 INPUT jack
This standard, unbalanced mono 1/4" jack is used to provide input to the unit. It
is front panel mounted for easy access.