Rocktron VooDu Valve - Manual (Page 101)

99
Step 3 Turn the FUNCTION SELECT control clockwise to "REMOTE CONTROL".
REMOTE CONTROL
Step 4 Turn the PARAMETER SELECT control one step clockwise to display "REMOTE".
REMOTE OFF
Step 5 Turn the PARAMETER ADJUST control to select "ON".
REMOTE ON
Step 6 If the Voodu Valve titles are to be displayed on the All Access, turn the PARAMETER
SELECT control to "TITLE XFER".
TITLE XFER OFF
Step 7 Turn the PARAMETER ADJUST control to "ON" to enable title transfers from the Voodu
Valve to the All Access display.
TITLE XFER ON
To set up the All Access for remote operation, perform these steps from the All Access SETUP program:
(See the All Access user's manual for detailed information on editing the All Access)
Step 8 Set the Operating Mode to "REMOTE".
Set the Bank Size to "10".
Reinitialize only the controller information for the instant access switches and pedals using a
code of "231".
If the preset titles from the Voodu Valve are to be displayed on the All Access automatically,
set the Remote Title Number to match the Unit ID Number parameter on the Voodu Valve.
Step 9
Step 10
Step 11