Rocktron VooDu Valve - Manual (Page 16)

14
MIXER Function
The next function displayed after turning the FUNCTION SELECT control is the Mixer
function. The Mixer function parameters are included in all presets—regardless of which
configuration is currently recalled—although the parameter values stored in this function
are only for the currently recalled preset.
This digital mixer allows you to control most signal levels pertaining to each preset’s
configuration and stores these levels for each preset.
The PARAMETER SELECT control will allow you to access these Mixer parameters:
The VOLUME parameter determines the overall signal level of the
current preset.
The LEFT OUT LEVEL parameter allows you alter the level of the left
channel output of the current preset independent of the right channel.
The RIGHT OUT LEVEL parameter allows you alter the level of the
right channel output of the current preset independent of the left
channel.
The DIR/EFF MIX parameter is used to define the ratio of direct signal
level to effect (Chorus, Flange, Pitch Shift) signal level.
The DIRECT PAN parameter allows you to pan the direct signal to the
left or right.
The DELAY LEVEL parameter determines the overall level of the
delayed signal at the output relative to the direct signal and other effect
signals. This parameter can also be accessed from the Delay function
parameter list.
The REVERB LEVEL parameter determines the level of the reverb
signal at the output relative to the direct signal and other effect signals.
This parameter can also be accessed from the Reverb function param-
eter list.
VOLUME
LEFT OUT LVL
RIGHT OUT LVL
MIX DIR/EFF
DIR PAN
DELAY LVL
REVERB LVL