SpectraCal CalMAN for SCRATCH Plug-In User Manual
Page 6
17544 Midvale Ave. N. Shoreline, WA 98133 USA
Corporate: +1 206 420 7514 | Tech Support: +1 206 457 8949 |
c. Session Setup - LUT Device Setup
On the Session Setup page in the Color Cube workflow, click the Find 3D LUT Device button.
Because you want to generate a standalone LUT file, you will use the Cube Generator device.
1. On the Display dialog, under Manufacturer, select “SpectraCal.”
2. Under Model, select “SpectraCal – Cube Generator (3D LUT).”
3. Click Connect.
d. Session Options
On the Session Options page in the Color Cube workflow, you need to select the Input Signal
Levels to match the
display you are calibrating and the selected SCRATCH format.
To calibrate the SCRATCH Interface RGB monitor or a dual head RGB output monitor,
driven through the standard graphics adapter (or the laptop screen)
:
For ‘Input Signal Levels,’ select ‘Full (0-1023).’
To calibrate an SDI video display, connected to SCRATCH through an SDI video output
device (i.e. AJA, DeckLink, Bluefish, or Quadro):
For ‘Input Signal Levels,’ select ‘SMPTE (64-940).’
If
,
in
SCRATCH, you selected one of the ‘Scaled’ formats (e.g. Rec709 Scaled),
then in CalMAN, on the Source Settings tab, enable the ‘SDI Range – Scaled
(SMPTE)’ setting (enabled by default).
If you did not select one of the ‘Scaled’ formats, be sure to disable the
CalMAN ‘SDI Range – Scaled (SMPTE)’ setting.