SpectraCal CalMAN for SCRATCH Plug-In User Manual
Page 9
17544 Midvale Ave. N. Shoreline, WA 98133 USA
Corporate: +1 206 420 7514 | Tech Support: +1 206 457 8949 |
2. Under File Path, select the desired directory path and provide a name for the LUT file
that CalMAN will create (e.g. monitor ID and date).
3. Under Calibration Type, select the desired type of 3D LUT calibration process.
IR Profile (time based): Creates the best quality display calibration 3D LUT
possible in the selected period of time. You select how much display quality you
have time for, from 30 minutes to maximum display quality (6,000 points max).
Uses Intelligent Resolution Profiling to search out the most nonlinear color
space areas and correct those first.
IR Profile (point based): Creates the best quality display calibration 3D LUT
possible with the selected number of measurement points (1,000 - 10,000
points). Uses Intelligent Resolution Profiling to search out the most nonlinear
color space areas and correct those first.
Lightning LUT: Creates a display calibration 3D LUT in five minutes or less.
Produces a very high quality result on professional displays with moderate
linearity. Displays with significant nonlinearity may produce marginal results.
4. Under Video Range, select “SMPTE (16-235)” if you are calibrating an SDI video monitor
and have selected one of the ‘Scaled’ formats
in
SCRATCH.
5. Click OK.
When the AutoCal process completes, you are ready to load the 3D LUT file that CalMAN created
into ASSIMILATE SCRATCH (see below).