SpectraCal madVR - Manual (Page 3)

17544 Midvale Ave. N. Shoreline, WA 98133 USA
Corporate: +1 206 420 7514 | Tech Support: +1 206 457 8949 | www.spectracal.com
c. Session Setup - LUT Device Setup
On the CalMAN Session Setup page, click the Find 3D LUT Device button. Because you want to
generate a standalone LUT file, you will use the Cube Generator device.
1. On the Find Display dialog (see below), under Manufacturer, select “SpectraCal.”
2. Under Model, select “SpectraCal – Cube Generator (madVR).”
3. Click Connect.
d. Session Options page
On the CalMAN Session Options page, you need to select the Input Signal Levels to match the
display you are calibrating and the selected output levels in madVR (see below).